Description
Assembly
It’s hardly an IKEA sideboard but there is a minor bit of home assembly required, the clear ‘cockpit’ and laser-cut stainless trim (peel off the backing paper if you want a polished finish to your trim, or use the other way up for a matt finish) needs attaching to the main part of the screen using the supplied 7 stainless steel bolts and Nyloc nuts. The metal trim sits uppermost.
Assembly video: Build the Bullet
Fitting
Fitting is simple thanks to the Hi-Torque fastener which slides over the inner lip of the screen. Not only is it quick and easy to fit but it also means taking it off is simple when you need to get into the headset to change a bulb.
Fitting video: See how quick they are to fit here
Wrap it
Before fitting simply wrap a length of quality electrical tape (Gaffa tape, or 3M tape gives good adhesion and is thick enough to allow the Hi-Torque fitting to grip firmly) around your headlight rim and any painted areas that the screen touches. The tape serves to protect the paintwork and also to give the gloss screen a good surface to grip on to. Simply slide the screen over the headlight rim and tighten the clip, either using a screwdriver or socket.
Adjustment
The screen has been trimmed for clearance to the legshields but it can be trimmed further at home if needed to clear any accessories you have. You can trim the ABS with a Dremel or a hand file.
FEATURES:
- Designed and made in the UK.
- Exclusive SLUK product
- Simple to fit: pushes over the headlight rim and secures to the headset using the Hi-Torque clip.
- Quick to remove: for ease of changing bulbs.
- Made from tough ABS plastic (as used for most motorcycle fairings) it can be easily trimmed, sanded or painted.
- Produced in racy high-gloss finish (white/black/silver/carbon effect)
- Fully packaged and ready to fit after simple assembly.
- Shipped direct from the manufacturer.
- Made to order but usually shipped within 3 days.
- SIP & Scooter Center stock SLUK Plastics for Europe
- UK postage £6.95, World £15
* Hi-Torque fasteners can be tightened to 15Nm (approximately 3 times tighter than a traditional hose clip) however over-tightening risks damage to the screen. We recommend you periodically tighten the band to ensure the screen remains firmly fixed.
* At least a single layer of electrical tape must be applied to the headset before fitting the screen if you do not want the paint to become marked during use.
Reviews
There are no reviews yet.